UCX16 Bearings
UCX16 Insert bearing
2023-01-05
YAT 216-300 Bearings
YAT 216-300 Insert bearing
2023-01-05

UC 316 Bearings

UC 316 Bearings
UC 316 Bearings

UC 316 Insert bearing

Technical Specification of UC 316 Bearings

Dimensions

Dimensions of UC 316 Bearings

d
80 mm
Bore diameter
D
170 mm
Outside diameter
B
86 mm
Width of inner ring
C
44 mm
Width of outer ring
d1
107.9 mm
Outside diameter of inner ring
B4
14 mm
Distance face to thread centre
r1,2
min.3.5 mm
Chamfer dimension of inner ring
s1
52
Distance from locking device side face to raceway centre

Caliculation Data of UC 316 Bearings

 
Basic dynamic load ratingC
124 kN
Basic static load ratingC0
86.5 kN
Fatigue load limitPu
3.25 kN
Limiting speed 
2 150 r/min
  
Limiting speed with shaft tolerance h6
Calculation factorf0
13

Mass of UC 316 Bearings

Mass
5.45 kg

 

Mounting Information of UC 316 Bearings

Set screwG2
M14x1.5
Hexagonal key size for set screwN
6 mm
Recommended tightening torque for set screw 
38.5 Nm

Product Features of UC 316 Bearings

  • Quick and easy mounting
    Different locking methods allow quick and easy mounting of the housing bearing onto the shaft.
  • Adapting to initial misalignment
    Spherical outer surface can be initially misaligned by tilting in the housing
  • Service life
    Long The different sealing solutions available offer a long service life for a variety of applications with high contamination levels.
  • Reduced noise and vibration levels
    Where high noise and vibration levels are required, SKF can provide suitable shaft locking methods.

Applications of UC 316 Bearings

Insert bearings (SKF Y-bearings) are based on sealed deep groove ball bearings in the 62 and 63 series, but have a convex outer ring and in most cases an extended inner ring with a specific locking device, enabling quick and easy mounting onto the shaft.The following are examples of applications where insert bearings may be used:

  • Agriculture
  • Food and beverage processing and packaging
  • Air handling
Applications of W 618/0.6 Bearings
Cement
Applications of Bearings
Wind Turbines
Applications of Bearings
Steel Industry
Applications of Bearings
Railways
Applications of Bearings
Food Processing Machinery
Applications of Bearings
Motorcycles
Applications of Bearings
Mining & Construction
Applications of Bearings
Electric motors and generators

FAQ of UC 316 Bearings

  • Generally speaking, insert bearings are standard radial bearings that fit into the housing. Although they are usually sold with the housing, these bearings can also be purchased as a stand-alone product to be used as a replacement. While standard radial ball bearings must be pressed into a machined shaft, with special mounting tools, insert bearings can be fitted directly to the shaft with a sliding fit. However, insert bearings are usually mounted on shafts with bores slightly smaller than the bore diameter of the bearing. This loose fit requires a locking device to hold the bearing firmly in place. The inner ring of the bearing extends to one side to accommodate the locking device. In addition, the width of the inner ring of a housing bearing may vary depending on the type of bearing.

Loads are defined by their direction. Loads perpendicular to the shaft are called radial loads and loads parallel to the shaft are called axial (thrust) loads.

DGBB can carry axial loads in both directions, whereas angular contact ball bearings can only carry axial loads in one direction.

More Products

Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
None of our operators are available at the moment. Please, try again later.
Our operators are busy. Please try again later
:
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended

Request A Quote Today