YAR 210-115-2LPW/ZM Bearings
YAR 210-115-2LPW/ZM Insert bearing
YAR 210-115-2F Bearings
YAR 210-115-2F Insert bearing

YAR 210-115-2LPW/SS Bearings

YAR 210-115-2LPW/SS Bearings
YAR 210-115-2LPW/SS Bearings

YAR 210-115-2LPW/SS Insert bearing

Technical Specification of YAR 210-115-2LPW/SS Bearings


Dimensions of YAR 210-115-2LPW/SS Bearings

49.213 mm
Bore diameter
90 mm
Outside diameter
51.6 mm
Width of inner ring
22 mm
Width of outer ring
62.51 mm
Outside diameter of inner ring
9 mm
Distance face to thread centre
min.1 mm
Chamfer dimension of inner ring
Distance from locking device side face to raceway centre

Caliculation Data of YAR 210-115-2LPW/SS Bearings

Basic dynamic load ratingC
29.6 kN
Basic static load ratingC0
23.2 kN
Fatigue load limitPu
0.98 kN
Limiting speed 
2 200 r/min
Limiting speed with shaft tolerance h6
Calculation factorf0

Mass of YAR 210-115-2LPW/SS Bearings

0.79 kg

Mounting Information of YAR 210-115-2LPW/SS Bearings

Set screwG2
3/8-24 UNF
Hexagonal key size for set screwN
4.763 mm
Recommended tightening torque for set screw 
16.5 Nm


Product Features of YAR 210-115-2LPW/SS Bearings

  • Quick and easy mounting
    Different locking methods allow quick and easy mounting of the housing bearing onto the shaft.
  • Adapting to initial misalignment
    Spherical outer surface can be initially misaligned by tilting in the housing
  • Service life
    Long The different sealing solutions available offer a long service life for a variety of applications with high contamination levels.
  • Reduced noise and vibration levels
    Where high noise and vibration levels are required, SKF can provide suitable shaft locking methods.

Applications of YAR 210-115-2LPW/SS Bearings

Insert bearings (SKF Y-bearings) are based on sealed deep groove ball bearings in the 62 and 63 series, but have a convex outer ring and in most cases an extended inner ring with a specific locking device, enabling quick and easy mounting onto the shaft.The following are examples of applications where insert bearings may be used:

  • Agriculture
  • Food and beverage processing and packaging
  • Air handling
Applications of W 618/0.6 Bearings
Applications of Bearings
Wind Turbines
Applications of Bearings
Steel Industry
Applications of Bearings
Applications of Bearings
Food Processing Machinery
Applications of Bearings
Applications of Bearings
Mining & Construction
Applications of Bearings
Electric motors and generators

FAQ of YAR 210-115-2LPW/SS Bearings

  • Generally speaking, insert bearings are standard radial bearings that fit into the housing. Although they are usually sold with the housing, these bearings can also be purchased as a stand-alone product to be used as a replacement. While standard radial ball bearings must be pressed into a machined shaft, with special mounting tools, insert bearings can be fitted directly to the shaft with a sliding fit. However, insert bearings are usually mounted on shafts with bores slightly smaller than the bore diameter of the bearing. This loose fit requires a locking device to hold the bearing firmly in place. The inner ring of the bearing extends to one side to accommodate the locking device. In addition, the width of the inner ring of a housing bearing may vary depending on the type of bearing.

Loads are defined by their direction. Loads perpendicular to the shaft are called radial loads and loads parallel to the shaft are called axial (thrust) loads.

DGBB can carry axial loads in both directions, whereas angular contact ball bearings can only carry axial loads in one direction.

More Products

Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
None of our operators are available at the moment. Please, try again later.
Our operators are busy. Please try again later
Have you got question? Write to us!
This chat session has ended

Request A Quote Today