YSP 211 SB-2F Bearings
YSP 211 SB-2F Insert bearing
2023-01-03
YET 211 Bearings
YET 211 Insert bearing
2023-01-03

YSA 212-2FK Bearings

YSA 212-2FK Bearings
YSA 212-2FK Bearings

YSA 212-2FK Insert bearing

Technical Specification of YSA 212-2FK Bearings

Dimensions

Dimensions of YSA 212-2FK Bearings

d
55 mm
Bore diameter of sleeve
D
110 mm
Outside diameter
B1
62 mm
Width of sleeve
B
42.5 mm
Width of inner ring
C
26 mm
Width of outer ring
d1
75.64 mm
Outside diameter of inner ring
d3
80 mm
Outside diameter of lock nut
s1
33.7
Distance from locking device side face to raceway centre
Value specified for s1 is approximate and before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position).

Caliculation Data of YSA 212-2FK Bearings

Basic dynamic load ratingC
52.7 kN
Basic static load ratingC0
36 kN
Fatigue load limitPu
1.53 kN
Limiting speed 
3 400 r/min
Calculation factorf0
14
 

Mass of YSA 212-2FK Bearings

Mass
1.05 kg

 

Mounting Information of YSA 212-2FK Bearings

Associated spanner 
HN 12
Recommended tightening angle for lock nutα
95 °

Product Features of YSA 212-2FK Bearings

  • Quick and easy mounting
    Different locking methods allow quick and easy mounting of the housing bearing onto the shaft.
  • Adapting to initial misalignment
    Spherical outer surface can be initially misaligned by tilting in the housing
  • Service life
    Long The different sealing solutions available offer a long service life for a variety of applications with high contamination levels.
  • Reduced noise and vibration levels
    Where high noise and vibration levels are required, SKF can provide suitable shaft locking methods.

Applications of YSA 212-2FK Bearings

Insert bearings (SKF Y-bearings) are based on sealed deep groove ball bearings in the 62 and 63 series, but have a convex outer ring and in most cases an extended inner ring with a specific locking device, enabling quick and easy mounting onto the shaft.The following are examples of applications where insert bearings may be used:

  • Agriculture
  • Food and beverage processing and packaging
  • Air handling
Applications of W 618/0.6 Bearings
Cement
Applications of Bearings
Wind Turbines
Applications of Bearings
Steel Industry
Applications of Bearings
Railways
Applications of Bearings
Food Processing Machinery
Applications of Bearings
Motorcycles
Applications of Bearings
Mining & Construction
Applications of Bearings
Electric motors and generators

FAQ of YSA 212-2FK Bearings

  • Generally speaking, insert bearings are standard radial bearings that fit into the housing. Although they are usually sold with the housing, these bearings can also be purchased as a stand-alone product to be used as a replacement. While standard radial ball bearings must be pressed into a machined shaft, with special mounting tools, insert bearings can be fitted directly to the shaft with a sliding fit. However, insert bearings are usually mounted on shafts with bores slightly smaller than the bore diameter of the bearing. This loose fit requires a locking device to hold the bearing firmly in place. The inner ring of the bearing extends to one side to accommodate the locking device. In addition, the width of the inner ring of a housing bearing may vary depending on the type of bearing.

Loads are defined by their direction. Loads perpendicular to the shaft are called radial loads and loads parallel to the shaft are called axial (thrust) loads.

DGBB can carry axial loads in both directions, whereas angular contact ball bearings can only carry axial loads in one direction.

More Products

Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
None of our operators are available at the moment. Please, try again later.
Our operators are busy. Please try again later
:
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended

Request A Quote Today